Hydraulic Press Brake; Type Hydraulic Press Brake, 3-Speed RAM; Input Supply Rating 208 to 230/460 Volt AC 60 Hertz 3-Phase; Capacity 350 Ton; Pressure Rating 2500 PSI; Material Steel; Size 183 Inch Length x 56-1/2 Inch Width; Applicable Standard ANSI B11.3; Power Rating 30 HP; Width of Bed 5-1/2 Inch; Distance Between Housing 150-1/2 Inch; Bed Length 14 Foot

Simple and Flexible Controls - Use Either a Convenient Multi-Switch Control Panel or a 3-Position Fully Guarded Foot Switch; Accuracy - Every Betenbender Machine is Thoroughly Inspected and Tested; Versatility - Betenbender Press Brakes Have Long, Full Tonnage Stroke; Adjustable Length and Selectable Speed Combinations; Adjustable Height for Short Stroke Two-Speed is Standard; Three-Speed with Infinitely Adjustable Low Speed is Optional This Option Prevents Sudden Whip up of the Work During Bending Operations; Maintenance - Clevis Mounted Cylinders Eliminate Cylinder Binding Reducing the Possibility of Oil Leaks; Pins and Bushings Do Not Rotate Under Load, Resulting in Much Less Wear than Competitive Products; Easy Hydraulic System Maintenance - The Manifold Assembly Saves Space and Makes it Easy to Replace Many Components, the Convenient Work Height Makes the Job Easier; Convenient Settings - Readout Reads in Increments of 0.001 Inch Allows Recorded Settings of Closed Heights; Standard Components - The Control System Components, Micro Switches, Clamp-Type Back Gauge, Hydraulic Fluid and Filter Cartridges are All Standard Equipment, Making Routine Maintenance Easier; Flexibility - 2-Speed Ram is Electrically Controlled it Lets You Shift to a Lower Speed Before Coming into Contact with Sheet Metal; Control - The Ram Stops at the Point of Reference and Self-Levels on Every Stroke; Main Control Cabinet Enclosures are Mounted On the Side Frame Containing Magnetic, Non-Reversing Motor, Starter and 110/120V Control Circuit; Safety and Reliability - The Control System Operates at 110/120V Using a Minimum of Circuitry the System Operates Predominantly with American Made Electronics and American Made Motors; Durability - All Steel End Frames, Ram and Bed; Ram Level - is Accomplished by Two Hydraulic Systems One for Each Cylinder, which Keeps them Parallel Self-Levels at Bottom of Each Stroke Even if Hydraulic System is Out of Adjustment; Proven Performance; Made in USA