MIG Welding Wire Feeder; Item MIG Welding Wire Feeder; Type Portable, Remote Control; Capacity 0.023 to 0.052 Inch (Solid), 0.03 to 5/64 Inch (Flux-Cored); Applicable Standard ISO 9001; Overall Dimension 9 Inch Width x 21 Inch Depth x 15.5 Inch Height; Input Supply Rating 24 Volt AC 50/60 Hertz 10 Amp; Welding Current Rating 425 Amp at 60 Percent Duty Cycle; Wire Feed Speed 50 to 700 IPM; Maximum Spool Size Capacity 12 Inch; Application Shipbuilding, Construction, Heavy Manufacturing, Rental

Ultra-Low Drag Inlet Guide Pins Make Loading the Wire Easy and Do Not Deform the Wire on the Way into the Drive Rolls; Simply Thread Wire Through the Pins and into Drive Rolls; There are Two Ways to Advance the Wire Through the Drive Roll and into the Gun; Either Open the Pressure Arm and Thread the Wire into the Grooves in the Drive Roll and on into the Gun Inlet or Place the Wire Between the Pins and Use the Jog Switch to Advance the Wire Through the Drive Roll; Gun Locking Tab Works with Guns Having Corresponding Locking Grooves to Prevent Gun from Being Pulled Out if the Feeder is Dragged by the Gun; Trigger Hold is Located on Front Panel, Jog and Purge are Located on Inner Control Panel; Digital Meters with Sunvision Technology Can Display Voltage, Wire Feed Speed and also Amperage if Desired; Meters Can be Seen Clearly Even in Direct Sunlight